transceiver test system specification sheet jfw model 50PMA-012 jfw industries, inc. phone: 317-887-1340 sales@jfwindustries.com www.jfwindustries.com frequency range 2-6 ghz configuration 9 port transceiver test system (see block diagram 092-5356) impedance 50 ohms nominal attenuation range 0-63 db in 1 db steps vswr 1.7:1 maximum < 1.6:1 typical attenuation accuracy 1.0 db or 3% (guaranteed monotonic) insertion loss 36.0 db maximum 31.3 db typical @ 2 ghz 33.9 db typical @ 6 ghz power divider isolation 21 db minimum rf input power 1 watt average ac supply 100-240 vac @ 47-63 hz remote control rs-232 (9600, 19200, or 38400 baud) ethernet (tcp, 10/100, up to 4 users) remote commands variable handover (vhnd av aw vx vy tz) fade attenuator (fax y z t) set attenuator (sax y) read attenuator (rax) pause (pausex) disconnect (dis) close (close) change baud rate (cbx) identification (idn) rf connector sma female operating temperature range 0oc to +50oc physical size see outline drawing 092-6110 03/03/2009 trs 03/03/2009 ecr/ecn # date rev appr / date ecr/ecn # dat e rev appr / date 17261 05/28/2009 a trs 05/28/2009 17302 06/11/2009 b trs 06/11/2009 jfw form e-7-f rev f page 1 of 1
|